ဒီဇယ် သို့မဟုတ် လျှပ်စစ် - စိုက်ပုတ်မြေသေးငယ်အတွက် စက်များအတွက် အားရှိမှုရွေးချယ်ရန် နည်းလမ်း
ဒီဇယ်နှင့်လျှပ်စစ်အားကို WY-9ZT-0.6S၊ WY-93QS-2S၊ WY-TH-200 နှင့် WY-5TY-43-86 ဟုခေါ်သည့် VYMOR ၏ စုံလင်သော စိုက်ပုတ်မြေသေးငယ်ရှိ စက်လေးများတွင် နှိုင်းယှဉ်ထားခြင်းဖြစ်ပြီး အားလုံးသည် တစ်ဖောက် ၂၂၀ ဗို့အား လျှပ်စစ်မော်တာကို အသုံးပြုနိုင်ပါသည်။
For small farms without three-phase electricity, VYMOR’s WY-9ZT-0.6S, WY-93QS-2S, WY-TH-200, and WY-5TY-43-86 all support electric operation on standard 220 V / single-phase supply — no three-phase infrastructure required. All four models also offer diesel and gasoline drive options.
Diesel or electric chaff cutter for a small farm
Electric drive is viable for both chaff cutters listed: WY-9ZT-0.6S (2.2 kW, 0.4–1 t/h capacity) and WY-93QS-2S (3 kW, 3 t/h capacity). Both operate on 220 V / single-phase voltage and do not require three-phase power. Diesel drive is available as an alternative for either model where grid access is unreliable or unavailable.
Which farm machine power option to choose without three-phase electricity
All four VYMOR models in scope — two chaff cutters (WY-9ZT-0.6S, WY-93QS-2S), one multifunction thresher (WY-TH-200), and one corn sheller (WY-5TY-43-86) — are configured for 220 V / single-phase electric operation. None require three-phase supply. Diesel remains an optional configuration where grid power is not available.
Power & capacity comparison across models
| မှတ်တမ်း | အမျိုးအစား | ပါဝါ | စွမ်းရည် | ဗို့အား | မော်တာရွေးချယ်မှုများ |
|---|---|---|---|---|---|
| WY-9ZT-0.6S | မြက်ဖြတ်စက် | 2.2 kW | 0.4–1 t/h | ၂၂၀ โวลต์ / တစ်ဖေ့စ် | ဒီဇယ် / ဂက်စိုလင် / လျှပ်စစ် |
| WY-93QS-2S | မြက်ဖြတ်စက် | 3 kW | 3 t/h | ၂၂၀ โวลต์ / တစ်ဖေ့စ် | ဒီဇယ် / ဂက်စိုလင် / လျှပ်စစ် |
| WY-TH-200 | အမျိုးမျိုး ဖြေရှင်းနိုင်သည့် စက် | 2.2 kW | 800–1000 kg/h | ၂၂၀ โวลต์ / တစ်ဖေ့စ် | ဒီဇယ် / ဂက်စိုလင် / လျှပ်စစ် |
| WY-5TY-43-86 | မုံညှင်းခွဲစက် | 2.2 kW | 0.5–0.8 t/h | ၂၂၀ โวลต์ / တစ်ဖေ့စ် | ဒီဇယ် / ဂက်စိုလင် / လျှပ်စစ် |
All models share identical motor speed (2800 rpm), accept fresh or dry forage (for chaff cutters) or corn on the cob (for threshers/shellers), and require sample verification before bulk order to confirm suitability and output.
Contact VYMOR for a quotation and sample check.
FAQ
Do any of these machines require three-phase electricity?
No. All four models — WY-9ZT-0.6S, WY-93QS-2S, WY-TH-200, and WY-5TY-43-86 — operate on 220 V / single-phase supply.
Can I switch between diesel and electric drive on the same machine?
Drive options (diesel, gasoline, or electric) are configured per order; discuss your required drive during customization.
What is the typical lead time for an electric-configured machine?
Typical lead time is 15–35 days, depending on order quantity.