ម៉ាស៊ីនគុណភាពខ្ពស់។ ភាពជាដៃគូយូរអង្វែង។hunanweiyan@gmail.comWhatsApp +8613043694888
ខ្មែរ
ស្នើសុំការប៉ាន់ស្មានតម្លៃ

ឌីហែល ឬ អគ្គិសនី៖ របៀបជ្រើសរើសជម្រើសថាមពលសម្រាប់ម៉ាស៊ីនកសិកម្មតូចៗ

VYMOR · 2026-09-30

ប្រៀបធៀបជម្រើសថាមពលដែលប្រើប្រាស់ប្រេងឌីហែល និងថាមពលអគ្គិសនី លើម៉ាស៊ីនសម្រាប់កសិកម្មតូចៗចំនួនបួនរបស់ VYMOR (WY-9ZT-0.6S, WY-93QS-2S, WY-TH-200, WY-5TY-43-86) ដែលទាំងអស់គ្នាអាចប្រើប្រាស់ថាមពលអគ្គិសនីផ្នែកតែមួយ 220 V។

For small farms without three-phase electricity, VYMOR’s WY-9ZT-0.6S, WY-93QS-2S, WY-TH-200, and WY-5TY-43-86 all support electric operation on standard 220 V / single-phase supply — no three-phase infrastructure required. All four models also offer diesel and gasoline drive options.

Diesel or electric chaff cutter for a small farm

Electric drive is viable for both chaff cutters listed: WY-9ZT-0.6S (2.2 kW, 0.4–1 t/h capacity) and WY-93QS-2S (3 kW, 3 t/h capacity). Both operate on 220 V / single-phase voltage and do not require three-phase power. Diesel drive is available as an alternative for either model where grid access is unreliable or unavailable.

Which farm machine power option to choose without three-phase electricity

All four VYMOR models in scope — two chaff cutters (WY-9ZT-0.6S, WY-93QS-2S), one multifunction thresher (WY-TH-200), and one corn sheller (WY-5TY-43-86) — are configured for 220 V / single-phase electric operation. None require three-phase supply. Diesel remains an optional configuration where grid power is not available.

Power & capacity comparison across models

ម៉ូដែលប្រភេទថាមពលសមត្ថភាពវ៉ុលជម្រើសប្រព័ន្ធបញ្ជូន
WY-9ZT-0.6Sម៉ាស៊ីនកាត់ស្មៅ2.2 kW0.4–1 t/h220 V / មួយដំណាំឌីហែល / ប៉េត្រូល / អគ្គិសនី
WY-93QS-2Sម៉ាស៊ីនកាត់ស្មៅ3 kW3 t/h220 V / មួយដំណាំឌីហែល / ប៉េត្រូល / អគ្គិសនី
WY-TH-200ម៉ាស៊ីនប៉ះច្រើនមុខងារ2.2 kW800–1000 kg/h220 V / មួយដំណាំឌីហែល / ប៉េត្រូល / អគ្គិសនី
WY-5TY-43-86ម៉ាស៊ីនប៉ះគ្រាប់ស្វាយ2.2 kW0.5–0.8 t/h220 V / មួយដំណាំឌីហែល / ប៉េត្រូល / អគ្គិសនី

All models share identical motor speed (2800 rpm), accept fresh or dry forage (for chaff cutters) or corn on the cob (for threshers/shellers), and require sample verification before bulk order to confirm suitability and output.

Contact VYMOR for a quotation and sample check.

FAQ

Do any of these machines require three-phase electricity?

No. All four models — WY-9ZT-0.6S, WY-93QS-2S, WY-TH-200, and WY-5TY-43-86 — operate on 220 V / single-phase supply.

Can I switch between diesel and electric drive on the same machine?

Drive options (diesel, gasoline, or electric) are configured per order; discuss your required drive during customization.

What is the typical lead time for an electric-configured machine?

Typical lead time is 15–35 days, depending on order quantity.