Maquinaria de calidad. Asociaciones a largo plazo.hunanweiyan@gmail.comWhatsApp +8613043694888
Español
Solicitar cotización

¿Molino para pellets para alimento de 220 V o 380 V? Selección de un modelo WY-KL según fuente de alimentación y capacidad

VYMOR · 2026-09-30

Compare las amoladoras de pellets de pienso VYMOR WY-KL para 220 V monofásicos y 380 V trifásicos: potencia del motor, capacidad, rodillos y diámetros del troquel.

Choose by the power supply on your site first, then by output. On 220 V single-phase power, the WY-KL-125, WY-KL-150, WY-KL-160 and WY-KL-180 cover 60–300 kg/h with 4–5.8 kW copper motors. On 380 V three-phase power, the models in this guide include the WY-KL-210, WY-KL-260, WY-KL-300 and WY-KL-400, rated from 350 to 1250 kg/h with 7.5–32 kW copper motors. Both groups run at 1440 rpm with one die per machine.

220V single phase vs 380V three phase pellet mill

If your site only has 220 V single-phase power, choose from the 220 V group; the largest, the WY-KL-180, is rated at 250–300 kg/h with a 5.8 kW motor. For output above 300 kg/h, move to the 380 V three-phase group, starting with the WY-KL-210 at 350–450 kg/h. The WY-KL190 (5.5 kW, 200–300 kg/h) and the WY-KL230L (11 kW, 300 kg/h) are further 380 V three-phase options.

Engine drive: the WY-KL-160 has diesel / gasoline options, and for the WY-KL-180, WY-KL-210, WY-KL-260 and WY-KL-300 in this guide, diesel drive is discussed per order.

How much capacity does a small feed pellet mill have

The smallest model in this range, the WY-KL-125, is rated at 60–100 kg/h with a 4 kW motor; the WY-KL-150 is rated at 100–150 kg/h. Output depends on your feed meal, so confirm suitability and output with a trial sample.

Selected WY-KL models compared

ModeloAlimentación eléctricaPotencia del motorCapacidadRollersEngine drive
WY-KL-125220 V / monofásico4 kW60–100 kg/h2—
WY-KL-150220 V / monofásico4 kW100–150 kg/h2—
WY-KL-160220 V / monofásico5.8 kW150–200 kg/h3Diesel / gasoline options
WY-KL-180220 V / monofásico5.8 kW250–300 kg/h4Diesel drive on request
WY-KL190380 V / trifásico5.5 kW200–300 kg/h——
WY-KL230L380 V / trifásico11 kW300 kg/h——
WY-KL-210380 V / trifásico7.5 kW350–450 kg/h2 / 3Diesel on request
WY-KL-260380 V / trifásico15 kW500–650 kg/h3 / 4Diesel on request
WY-KL-300380 V / trifásico22 kW600–750 kg/h4Diesel on request
WY-KL-400380 V / trifásico32 kW1000–1250 kg/h4—

Sources: 220 V models; WY-KL190; WY-KL230L; 380 V models.

Die apertures and pellet length

The 220 V models (WY-KL-125 to WY-KL-180) take dies with 2.5 / 4 / 6 / 8 mm apertures. The WY-KL-210 to WY-KL-400 take 3 / 4 / 6 / 8 mm, and the WY-KL230L has die hole diameters of 3 / 4 / 6 / 8 mm. For the WY-KL190, confirm the die aperture for the selected model. Confirm pellet length for your feed before ordering.

Contact VYMOR for a quotation and sample check.

Need a quotation or a trial sample? Solicitar cotización

FAQ

Does VYMOR make a 220V single-phase feed pellet mill?

Yes. The WY-KL-125, WY-KL-150, WY-KL-160 and WY-KL-180 run on 220 V single-phase power with copper motors, rated from 60 to 300 kg/h.

Which WY-KL pellet mill has the highest output?

The WY-KL-400: 32 kW, 1000–1250 kg/h, on 380 V three-phase power.

Can a WY-KL pellet mill run on a diesel engine?

The WY-KL-160 has diesel / gasoline options. For the WY-KL-180, WY-KL-210, WY-KL-260 and WY-KL-300, diesel drive is discussed per order.